Dock, deck, and outdoor wood staining for Eagle Mountain Lake homes. We do marine-grade finishes for the docks and piers at the waterline, and stain built to hold up against the reflected sun and humidity off the water.
We Are Fully insured.

Docks and boathouses
Decks and outdoor wood
Marine-grade finishes
Fully insured
Wood on a lake property has the hardest job of any wood on a house. Eagle Mountain Lake homes sit in full sun that comes at them twice, once from the sky and once bouncing off two hundred miles of open water, plus the humidity coming off the lake all summer. That combination bleaches and dries out wood fast, and the closer the wood is to the water, the worse it gets. Staining it right is less about looks and more about what the finish has to survive.
The dock is the extreme case. A dock, a boathouse, or a pier lives right at the waterline, splashed, soaked, and baked in turn, so it needs a marine-grade penetrating stain, not a film that will blister and peel under those conditions. A penetrating stain soaks into the wood and wears slowly instead of lifting off, which is exactly what you want somewhere you cannot easily strip and start over. Worth knowing: the Tarrant Regional Water District permits docks and structures on the lake, so any dock is finished with that in mind.
The rest of the lake wood is a step less brutal but still hard on a finish. Lakeside decks take the reflected sun and the foot traffic, pergolas and outdoor kitchens sit out in it all day, and fences and the home's own cedar and wood trim weather faster on the water side than they would inland. Here the choice is about how much pigment the wood needs: more pigment blocks more sun and lasts longer, less pigment shows more grain. On a sun-blasted deck we lean toward a semi-transparent or semi-solid stain for the protection; on a feature cedar door we might go more transparent to show the wood.
The other half of a lasting finish is prep. Wood has to be cleaned of old failing stain, mildew, and algae, which grows fast near water, then sanded and allowed to dry, because stain will not hold on damp wood. Skip that and even a good product fails early. And because outdoor wood wears rather than peels, keeping it up is simple, a re-coat on a schedule rather than a strip-and-redo. We are a Fort Worth company, and the lake is our northwest corner, so this is familiar wood to us.
A lake property has wood at the water, wood on the deck, and wood on the house, each with its own exposure. Here is what we handle.
The wood at the waterline, in the harshest exposure on the property, stained with a marine-grade penetrating product made for constant moisture and sun. We clean and prep it properly and set a re-coat schedule to stay ahead of it, working with the fact that the water district permits dock structures.
The lakeside decks and railings that face the water and take the reflected sun and the foot traffic, cleaned, sanded, and stained with enough pigment to hold up to the UV. Whether it is cedar, treated pine, or a tropical hardwood like ipe, we match the stain to the wood.
The outdoor living wood a lake backyard is built around — pergolas, covered patios, gazebos, and outdoor kitchen structures — stained and sealed so they hold up to sun and lake air instead of graying and drying out.
Wood fencing and gates, plus the home's own cedar siding, beams, columns, garage doors, front doors, and shutters, stained to match and to weather the exposure on the water side. The wood details that finish the look of a lake home.
A stain finish lives or dies on prep and on matching the product to the exposure. Here is how we work.
We start by cleaning the wood of old failing stain, mildew, and algae, which grows fast near the water. Old finish that is lifting has to come off so the new stain can bond, and a dock or deck that looks gray usually just needs the right cleaning to come back.
We sand the wood smooth where it needs it and make sure it is dry before we stain, because stain will not hold on damp wood. Near the lake that patience matters, and we time the work to the conditions rather than forcing it.
We match the product to the job - a marine-grade penetrating stain at the waterline, a semi-transparent or semi-solid on the sun-exposed decks for UV protection, more transparent where you want the grain to show. The right pigment and the right product for each surface and species.
Because stain wears instead of peeling, keeping it up is a re-coat on a schedule, not a strip-and-redo. We tell you when the dock, the deck, and the rest will be due again, since the waterline comes up first.
We are a Fort Worth company, based off Cordova Avenue, and Eagle Mountain Lake is our northwest corner. We know what the water does to wood out here - the reflected sun, the humidity, and the waterline exposure that finishes a dock faster than anything else - and how to prep and stain each part of a lake property so it holds up.
You get careful work, clean job sites, and an honest read on what your wood needs and when it will be due again. We keep the same crew on your job from the first walkthrough to the last, and we are easy to reach the whole way through.
We stain wood throughout the Eagle Mountain Lake communities and the surrounding northwest Fort Worth area.
The Resort on Eagle Mountain Lake, Lake Country Estates, The Orchards, The Waterfront, Bal Harbour, Fleming Pointe, and the Boat Club Road corridor.
Northwest Fort Worth, Saginaw, Azle, and the rest of Fort Worth and DFW. On the lake or nearby? Just ask.
Docks, boathouses, and piers, lakeside decks and railings, pergolas, covered patios, and outdoor kitchens, wood fencing and gates, and the home's own cedar siding, beams, columns, and doors. Anything on a lake property made of wood and exposed to the weather, we stain and maintain.
Because the waterline is the harshest exposure on the property - the wood is splashed, soaked, and baked in turn, and takes the sun reflected off the water on top of the sun from the sky. A marine-grade penetrating stain soaks in and wears slowly instead of blistering and peeling the way a film finish would in those conditions.
Yes. The Tarrant Regional Water District permits docks and structures on Eagle Mountain Lake, and we finish dock work with that in mind. Staining an existing dock is maintenance, but we are aware of how the lake's dock rules work and plan the job around them.
Stained, in almost every case. Stain penetrates the wood and wears slowly, shows the grain, and lets the wood breathe, while paint sits on top as a film that cracks and peels on horizontal and exposed outdoor wood - and that is worse near a lake. Stain also re-coats without the stripping a failed paint job needs.
It depends on the exposure. The dock and waterline wood come up first, often every one to two years, decks usually every two to three, and fences and the home's wood less often. Because stain wears instead of peeling, re-coating is straightforward, and we give you a schedule so nothing gets away from you.
We match the stain to the surface and the wood. A marine-grade penetrating oil stain for the waterline, a semi-transparent or semi-solid on sun-exposed decks for UV protection, and a more transparent stain where you want the grain to show. Cedar, treated pine, and tropical hardwoods like ipe each take a different product, and we choose accordingly.
We are fully insured. Texas does not license residential painters, so any painter claiming to be state-licensed is stretching it - what matters is insurance and careful work. We stain wood across the whole Eagle Mountain Lake area, from the Boat Club Road estates and the gated communities to the Azle side, plus northwest Fort Worth and the rest of DFW.
4905 Cordova Ave, Fort Worth, TX 76132
© House Painting Pros of Fort Worth. All rights reserved.